Bb-electronics Network Device I-7011 Manual do Utilizador Página 1

1I-7011, I-7018 User ManualRev:B1.0WarrantyAll products manufactured by ICP DAS are warrantedagainst defective materials for a period of one year from

10I-7011, I-7018 User Manual Rev:B1.0I-7018Analog InputInput Channel :8 differential or 6 differen-tial and 2 single-ended.Jumper select.Input Type :m

11I-7011, I-7018 User ManualRev:B1.01.4 Block Diagram

12I-7011, I-7018 User Manual Rev:B1.0I-7018/18P Analog Input Chan-nel 0 to 5 Wire Connection1.5 Wire ConnectionI-7011/11D/11P/11PD AnalogInput Wire Co

13I-7011, I-7018 User ManualRev:B1.0I-7018/18P Analog Input Chan-nel 6 and 7 Wire Connection,while the jumper JP1 setting is 8differential mode.I-701

14I-7011, I-7018 User Manual Rev:B1.01.6 Quick StartRefer to “I-7000 Bus Converter User Manual” and “Get-ting Start” for more detail.1.7 Default Setti

15I-7011, I-7018 User ManualRev:B1.01.9 CalibrationDon’t Perform Calibrate Until You Really Understand.Calibration Requirement for I-7011/11D/11P/11PD

16I-7011, I-7018 User Manual Rev:B1.01.10 Configuration TablesConfiguration Table of I-7011/11D/11P/11PD/18/18P :Baudrate Setting (CC)Analog Input Typ

17I-7011, I-7018 User ManualRev:B1.0TypeCodeInput Range Data Format +F.S. Zero -F.S.00-15 to +15mVEngineer Unit +15.000 +00.000 -15.000% of FSR +100.0

18I-7011, I-7018 User Manual Rev:B1.0

19I-7011, I-7018 User ManualRev:B1.0TypeCodeInput Range Data Format +F.S. Zero -F.S.16C Type0 to 2320degree CelsiusEngineer Unit +2320.0 +00.000 +00.0

2I-7011, I-7018 User Manual Rev:B1.0Table of Contents1. Introduction ...51.1 More Information...

20I-7011, I-7018 User Manual Rev:B1.02. CommandCommand Format : (Leading)(Address)(Command)[CHK](cr)Response Format : (Leading)(Address)(Data)[CHK](cr

21I-7011, I-7018 User ManualRev:B1.0General Command Sets (Continued)~AAO(Data) !AA Set Module Name Sec.2.19~AAEV !AA Enable/Disable Calibration Sec.2.

22I-7011, I-7018 User Manual Rev:B1.02.1 %AANNTTCCFFDescription : Set module ConfigurationSyntax : %AANNTTCCFF[CHK](cr)% a delimiter characterAA addre

23I-7011, I-7018 User ManualRev:B1.02.2 #**Description : Synchronized SamplingSyntax : #**[CHK](cr)# a delimiter character** synchronized sampling com

24I-7011, I-7018 User Manual Rev:B1.02.3 #AADescription : Read Analog InputSyntax : #AA[CHK](cr)# delimiter characterAA address of reading module(00 t

25I-7011, I-7018 User ManualRev:B1.02.4 #AANDescription : Read Analog Input from channel NSyntax : #AAN[CHK](cr)# delimiter characterAA address of rea

26I-7011, I-7018 User Manual Rev:B1.02.5 $AA0Description : Perform Span CalibrationSyntax : $AA0[CHK](cr)$ delimiter characterAA address of setting mo

27I-7011, I-7018 User ManualRev:B1.02.6 $AA1Description : Perform Zero CalibrationSyntax : $AA1[CHK](cr)$ delimiter characterAA address of setting mod

28I-7011, I-7018 User Manual Rev:B1.02.7 $AA2Description : Read ConfigurationSyntax : $AA2[CHK](cr)$ delimiter characterAA address of reading module (

29I-7011, I-7018 User ManualRev:B1.02.8 $AA3Description : Read CJC TemperatureSyntax : $AA3[CHK](cr)$ delimiter characterAA address of reading module

3I-7011, I-7018 User ManualRev:B1.02.11 $AA6 ...322.12 $AA8 ...

30I-7011, I-7018 User Manual Rev:B1.02.9 $AA4Description : Read Synchronized DataSyntax : $AA4[CHK](cr)$ delimiter characterAA address of reading modu

31I-7011, I-7018 User ManualRev:B1.02.10 $AA5VVDescription : Set Channel EnableSyntax : $AA5VV[CHK](cr)$ delimiter characterAA address of setting modu

32I-7011, I-7018 User Manual Rev:B1.02.11 $AA6Description : Read Channel StatusSyntax : $AA6[CHK](cr)$ delimiter characterAA address of reading module

33I-7011, I-7018 User ManualRev:B1.02.12 $AA8Description : Read LED ConfigurationSyntax : $AA8[CHK](cr)$ delimiter characterAA address of reading modu

34I-7011, I-7018 User Manual Rev:B1.02.13 $AA8VDescription : Set LED ConfigurationSyntax : $AA8V[CHK](cr)$ delimiter characterAA address of setting mo

35I-7011, I-7018 User ManualRev:B1.02.14 $AA9(Data)Description : Set CJC Offset ValueSyntax : $AA9(Data)[CHK](cr)$ delimiter characterAA address of se

36I-7011, I-7018 User Manual Rev:B1.02.15 $AABDescription : Thremocouple Open DetectionSyntax : $AAB[CHK](cr)$ delimiter characterAA address of readin

37I-7011, I-7018 User ManualRev:B1.02.16 $AAFDescription : Read Firmware VersionSyntax : $AAF[CHK](cr)$ delimiter characterAA address of reading modul

38I-7011, I-7018 User Manual Rev:B1.02.17 $AAMDescription : Read Module NameSyntax : $AAM[CHK](cr)$ delimiter characterAA address of reading module (0

39I-7011, I-7018 User ManualRev:B1.02.18 $AAZ(Data)Description : Set LED DataSyntax : $AAZ(Data)[CHK](cr)$ delimiter characterAA address of setting mo

4I-7011, I-7018 User Manual Rev:B1.02.35 ~AA2 ...572.36 ~AA3EVV...

40I-7011, I-7018 User Manual Rev:B1.02.19 ~AAO(Data)Description : Set Module NameSyntax : ~AAO(Data)[CHK](cr)~ delimiter characterAA address of settin

41I-7011, I-7018 User ManualRev:B1.02.20 ~AAEVDescription : Enable/Disable CalibrationSyntax : ~AAEV[CHK](cr)~ delimiter characterAA address of settin

42I-7011, I-7018 User Manual Rev:B1.02.21 @AADIDescription : Read Digital I/O and Alarm StatusSyntax : @AADI[CHK](cr)@ delimiter characterAA address o

43I-7011, I-7018 User ManualRev:B1.0high.Related Command :Sec.2.22 @AADO(Data), Set.2.23 @AAEAT, Sec.2.26 @AADARelated Topic :Sec.3.4 Digital Input an

44I-7011, I-7018 User Manual Rev:B1.02.22 @AADO(Data)Description : Set Digital OutputSyntax : @AADI[CHK](cr)@ delimiter characterAA address of setting

45I-7011, I-7018 User ManualRev:B1.02.23 @AAEATDescription : Enable AlarmSyntax : @AAEAT[CHK](cr)@ delimiter characterAA address of setting module (00

46I-7011, I-7018 User Manual Rev:B1.02.24 @AAHI(Data)Description : Set High AlarmSyntax : @AADI[CHK](cr)@ delimiter characterAA address of setting mod

47I-7011, I-7018 User ManualRev:B1.02.25 @AALO(Data)Description : Set Low AlarmSyntax : @AADI[CHK](cr)@ delimiter characterAA address of setting modul

48I-7011, I-7018 User Manual Rev:B1.02.26 @AADADescription : Disable AlarmSyntax : @AADA[CHK](cr)@ delimiter characterAA address of setting module (00

49I-7011, I-7018 User ManualRev:B1.02.27 @AACADescription : Clear Latch AlarmSyntax : @AACA[CHK](cr)@ delimiter characterAA address of setting module

5I-7011, I-7018 User ManualRev:B1.01. IntroductionI-7000 is a family of network data acquisition and controlmodules. They provide analog-to-digital, d

50I-7011, I-7018 User Manual Rev:B1.02.28 @AARHDescription : Read High AlarmSyntax : @AARH[CHK](cr)@ delimiter characterAA address of reading module (

51I-7011, I-7018 User ManualRev:B1.02.29 @AARLDescription : Read Low AlarmSyntax : @AARH[CHK](cr)@ delimiter characterAA address of reading module (00

52I-7011, I-7018 User Manual Rev:B1.02.30 @AAREDescription : Read Event CounterSyntax : @AARE[CHK](cr)@ delimiter characterAA address of reading modul

53I-7011, I-7018 User ManualRev:B1.02.31 @AACEDescription : Clear Event CounterSyntax : @AACE[CHK](cr)@ delimiter characterAA address of setting modul

54I-7011, I-7018 User Manual Rev:B1.02.32 ~**Description : Host OK.Host sends this command to all modules for broadcasting the infor-mation “Host OK”.

55I-7011, I-7018 User ManualRev:B1.02.33 ~AA0Description : Read Module StatusSyntax : ~AA0[CHK](cr)~ delimiter characterAA address of reading module (

56I-7011, I-7018 User Manual Rev:B1.02.34 ~AA1Description : Reset Module StatusSyntax : ~AA1[CHK](cr)~ delimiter characterAA address of setting module

57I-7011, I-7018 User ManualRev:B1.02.35 ~AA2Description : Read Host Watchdog Timeout IntervalSyntax : ~AA2[CHK](cr)~ delimiter characterAA address of

58I-7011, I-7018 User Manual Rev:B1.02.36 ~AA3EVVDescription : Set Host Watchdog Timeout IntervalSyntax : ~AA3EVV[CHK](cr)~ delimiter characterAA addr

59I-7011, I-7018 User ManualRev:B1.02.37 ~AA4Description : Read PowerOn Value and Safe ValueSyntax : ~AA4[CHK](cr)~ delimiter characterAA address of r

6I-7011, I-7018 User Manual Rev:B1.01.2 Pin Assignment

60I-7011, I-7018 User Manual Rev:B1.02.38 ~AA5PPSSDescription : Set PowerOn Value and Safe ValueSyntax : ~AA5PPSS[CHK](cr)~ delimiter characterAA addr

61I-7011, I-7018 User ManualRev:B1.03. Application Note3.1 INIT* pin OperationEach I-7000 module has a build-in EEPROM to store con-figuration informa

62I-7011, I-7018 User Manual Rev:B1.03.3 Dual Watchdog OperationDual Watchdog = Module Watchdog + Host WatchdogThe Module Watchdog is a hardware reset

63I-7011, I-7018 User ManualRev:B1.03.6 High/Low AlarmSome analog input modules, like I-7011, equip with thehigh/low alarm function. When the alarm fu

64I-7011, I-7018 User Manual Rev:B1.0To measure the Seebeck voltage directly is not availablebecause we must first connect a voltmeter to the thermoco

7I-7011, I-7018 User ManualRev:B1.0

8I-7011, I-7018 User Manual Rev:B1.01.3 SpecificationsI-7011/I-7011DAnalog InputInput Channel : 1Input Type :mV, V, mA(with external125 ohms resistor)

9I-7011, I-7018 User ManualRev:B1.0I-7011P/I-7011PDAnalog InputInput Channel : 1Input Type :mV, V, mA(with external125 ohms resistor)Thermocouple : Ty